Bounty Hunter Quick Silver Metal Detector

Call For Assistance

Bounty Hunter

Bounty Hunter Quick Silver Metal Detector

Was $149.00 NOW $97.99

  • Bounty Hunter Quick Silver User Manual
Product Warranty:
  • 5 Year, Limited Parts/Labor
User Rating:
GD Star Rating



If You Don't Want to Fuss with Knobs, Try the All Digital Quick Silver!

The Bounty Hunter Quick Silver Metal Detector is an entry level metal detector that is packed full of features to help you find the most buried treasures.  The Quick Silver is easy to assemble and in no time you will be finding coins as deep as 8 inches and larger treasures up to 3 feet deep with the fully submersible 8 inch search coil.  Metal Detecting on BeachNo more guessing what type of treasure is beneath your coil because the Bounty Hunter Quick Silver is equipped with a digital LCD target display.  Another useful feature of the Bounty Hunter Quick Silver is depth selection, which helps the user determine how deep or shallow they want to detect the buried targets.  As with most metal detectors the Quick Silver metal detector employs an audio feedback (3 tone) circuit to help determine the type of metal detected.  A low tone will be emitted for targets made of iron, a medium tone for nickels and aluminum, and a high tone for quarters and dimes. Preset ground balance is standard thus the signal reflected from mineralization in the ground will not cause false alarms.

What about Target Discrimination?

The Bounty Hunter Quick Silver comes with a very easy to setup variable notch target rejection feature that is a way easier form of discrimination then tuning knobs.  A simple press of the Target Reject button will place an X on the display underneath the target that will be rejected.  This feature is useful if the hobbyist is not interested in digging up iron nails if only coin shooting.  However, it should be explained that some rings and other valuable items might have a reflected signal similar to the rejected targets thus those valuable items would not cause an alarm.  The Quick Silver is powered by two 9 Volt batteries and comes equipped with a low battery indicator.

Overall the Bounty Hunter Quick Silver metal detector is a fully automated, easy to use metal detector.  This detector was designed with the hobbyist new to the area of metal detecting in mind.  If you are not sure if metal detecting is for you, this detector is cheap enough and has the most basic features to help you determine if this hobby is right for you. 

Quick Silver Metal Detector

Take a Look at a Quick Overview of the Quick Silver's Features:  

  • 8’’ submersible waterproof coil
  • Adjustable Sensitivity: determine what depth you want to target for finds
  • LCD Display with 4 Target ID segments
  • 3 Tone Audio System: helps determine what type of metal has been found without looking at  LCD
  • All Digital Variable Notch Discrimination
  • And More!


  1. Extremely Easy to Use and Produces Results
  2. Affordable with Higher End Features
  3. Good Depth


  1. Does not have target depth indication.
  2. No pinpointing feature


Bounty Hunter Quick Silver Technical Specifications

Length (Adjustable)   44" to 51.5"
Discrimination   Yes (Digital Notch)
Search Modes   2 (Motion All Metal, Discrimination)
Sensitivity Adjustment   Yes (Digital)
Electronic Pinpointing   No
Display Type   LCD
Volume   Fixed
Number of Audio Tones   3
Ground Balancing (Manual)   No
Ground Balancing (Automatic)   No
Ground Balancing (Fixed)   Yes
Battery Voltage Meter   No
Target Identification   Yes
Number of Target ID Segments   4
Depth Indication   No
Frequency   7 kHz
Standard Searchcoil   8" (Round)
Total Weight   2.8 lbs.
Batteries   Two 9-Volt batteries (not included)
Headphone Jack   1/4"
Warranty   5 Year, Limited Parts/Labor


Submit a Review for the Bounty Hunter Quick Silver Metal Detector

Target ID System
Battery Life
Ease of Use

Additional Comments: